Burned Bars and Exact Numbers: The Yard and Pound Before 1959
From the 1824 imperial standards to the 1834 Parliament fire and the Mendenhall Order, see how the yard and pound were defined before the 1959 agreement.
Today the inch is exactly 25.4 millimetres and the pound is exactly 0.45359237 kilograms. Those figures come from a 1959 agreement, and most accounts start there. This article looks at the period before it, when the yard and the pound were physical objects kept in vaults, copied, compared, damaged and sometimes lost. Understanding that earlier era explains why the 1959 agreement was needed, and why old documents sometimes disagree by small amounts.
The 1824 reform
By the early nineteenth century Britain had a patchwork of local and trade measures. The Weights and Measures Act 1824 tried to sweep this away with a single set of imperial standards. The yard was defined by a brass bar made in 1760, and the pound by a troy standard made in the 1750s. The Act also created the imperial gallon, defined by the volume of ten pounds of distilled water.
The Act included an interesting safeguard. If the standard yard were ever lost, it was to be restored by reference to a pendulum that beats seconds at the latitude of London. This is the same idea that had lost out to the meridian in France. It sounded sensible, but it turned out to be impractical, as we shall see.
The 1834 fire
On 16 October 1834 fire destroyed most of the old Palace of Westminster, including the building that held the standards. The yard and pound standards were damaged or lost, and the nation found itself without its official references. A commission was appointed to decide how to replace them.
The commission discovered that the pendulum method was not reliable enough. The result depended on subtle corrections for air buoyancy, the shape of the bob, and the local pull of gravity, and different experimenters could not agree closely. Instead, the commission recommended rebuilding the standards by comparing surviving copies and secondary scales that had been made earlier. This was a laborious process that took years and involved several scientists.
The standards of 1855
The restored standards were legalised by the Weights and Measures Act 1855. The imperial standard yard became a bronze bar, with the length marked by fine lines on gold plugs sunk into wells in the bar, and the imperial standard pound became a platinum weight. The pound was defined as the avoirdupois pound of 7,000 grains. Copies were made and distributed to other countries and institutions, which is how the same units spread across the Empire and beyond.
The troy pound, used for precious metals and containing 5,760 grains, was dropped from trade in 1878, though the troy ounce survives in the bullion market. The grain itself is now defined as exactly 64.79891 milligrams, which means a troy ounce of 480 grains is exactly 31.1034768 grams.
The American path
The United States had its own history. Early federal standards were copied from British originals, and for many years the country relied on copies of inconsistent quality. In 1866 Congress authorised the use of the metric system, and in 1875 the US joined the Metre Convention. When national prototype metres and kilograms arrived in 1890, the US had standards of the highest quality available, and they were more stable than the old yard bar.
In 1893 the Superintendent of the Coast and Geodetic Survey, Thomas Mendenhall, issued an order that the US would derive its customary units from the metre and kilogram. The yard was set at 3,600/3,937 of a metre, which is the same as saying that a metre is 39.37 inches. The pound was derived from the kilogram in a similar way. From that point, the American yard was a metric fraction in all but name, and the survey foot which comes from the same ratio lasted until 2022.
Why the two countries diverged
British standards still rested on the 1855 bar, while the US used the metric-derived value. Comparisons showed that the two yards differed by a few parts per million, which is a few millimetres per kilometre. The difference was too small to matter in carpentry, but it mattered in precision engineering, gauge making and aerospace work, where components from different countries had to fit. Industry in several countries had already been using 25.4 millimetres to the inch for convenience, and the official standards lagged behind practice.
The 1959 settlement
In 1959 the standards laboratories of the United States, United Kingdom, Canada, Australia, New Zealand and South Africa agreed to adopt the international yard of exactly 0.9144 metres and the international pound of exactly 0.45359237 kilograms. The compromise was designed to lie between the two earlier values, and it was close enough to both that nearly all existing work was unaffected.
The Americans kept the old definition for land surveying, because rebasing every coordinate would have been costly. That decision created the survey foot, which is the subject of other articles on this site.
The UK later wrote the same values into its own legislation, with the Weights and Measures Act 1963 defining the yard and pound by their metric equivalents. The bronze bar and the platinum weight became historical objects rather than working standards.
What this means for old data
- Historical measurements before 1959 may differ from modern conversions by a few parts per million, which is usually negligible but can matter in precision work.
- A US document may use the survey foot, so check the date and context.
- Troy and avoirdupois ounces differ: a troy ounce is about 31.10 g and an avoirdupois ounce about 28.35 g.
- Imperial gallons, pints and tons have separate histories, which is why they differ from US versions.
The lesson of the burned bars
The 1834 fire is a reminder of the weakness of artefact standards. When the object is destroyed, the unit has to be reconstructed from copies and from measurements, which introduces small errors. The nineteenth-century response, creating several verified copies and storing them in separate places, is the same one later used for the metre and kilogram. The eventual solution, in the twentieth century, was to remove the dependence on objects entirely by defining customary units as exact multiples of metric ones, which are themselves tied to constants of nature.
Frequently asked questions
What was destroyed in the 1834 fire?
The fire destroyed much of the Palace of Westminster, and with it the official yard and pound standards were damaged or lost, which prompted the commission that led to the 1855 standards.
Why is the troy ounce different from the ordinary ounce?
The two come from different pound systems. The troy pound has 12 ounces of 480 grains, while the avoirdupois pound has 16 ounces of 437.5 grains.
Did the 1959 agreement change the length of the yard much?
No. The change was a few parts per million, invisible in everyday use.
Who proposed fixing the inch at 25.4 mm?
The figure had been used by standards bodies and industry for years before 1959, and the agreement made it official across six countries.
Is the yard still a physical bar anywhere?
The old bars survive as historical objects, but the yard is defined today as exactly 0.9144 metres.
Try our length converter and mass converter to apply the exact modern values.