Running Pace and Speed Conversions: min/km, min/mile, km/h and mph
Convert running pace between minutes per kilometre and per mile, and to km/h or mph, with worked examples, finish-time tables and common treadmill mistakes.
Runners use two families of numbers that look unrelated. Pace says how long a distance takes, such as 5:30 per kilometre. Speed says how far you go in an hour, such as 10.9 km/h. Add the fact that some countries measure in kilometres and others in miles, and a simple question like “how fast is that?” can take a surprising amount of arithmetic. This guide explains how each form works, how to move between them, and where people go wrong.
Pace and speed are reciprocals
Pace is time per distance; speed is distance per time. That makes them reciprocals, the same relationship that links MPG and litres per 100 km. A smaller pace number means you are faster, while a larger speed number means you are faster. Because the two run in opposite directions, you cannot convert by multiplying by a constant. You divide into 60.
- Pace to speed: speed (km/h) = 60 ÷ pace (minutes per km).
- Speed to pace: pace (minutes per km) = 60 ÷ speed (km/h).
The same formulas work in miles: mph = 60 ÷ minutes per mile. Since 6:00 per km gives 60 ÷ 6 = 10 km/h, a pace of 6:00 per km is exactly 10 km/h, which is one reason that figure is so popular for treadmill settings.
The decimal trap
Pace is written as minutes and seconds, which are base 60, but calculators work in decimals. A pace of 5:30 is 5.5 minutes, not 5.30. Dividing 60 by 5.30 gives 11.32 km/h, whereas the correct figure is 60 ÷ 5.5 = 10.91 km/h. Before using any formula, convert the seconds to a fraction of a minute by dividing by 60. After the calculation, convert the decimal part back: 0.5 of a minute is 30 seconds.
Kilometres to miles and back
One mile is exactly 1.609344 kilometres, so pace converts with a single multiplication or division:
- Minutes per mile = minutes per km × 1.609344.
- Minutes per km = minutes per mile ÷ 1.609344.
Notice that this runs the opposite way from distance. A mile is longer than a kilometre, so each mile takes more time, and the per-mile pace number is larger. Many people instinctively divide when they should multiply and end up with a pace that is too fast to be believable.
Worked example
Take 5:00 per km. In decimals that is 5.0 minutes. Multiply by 1.609344 to get 8.0467 minutes per mile. The 0.0467 of a minute is about 2.8 seconds, so the pace is roughly 8:03 per mile. In speed terms, 60 ÷ 5 = 12 km/h, or 12 ÷ 1.609344 = 7.46 mph.
A conversion table
| Pace per km | Speed (km/h) | Pace per mile | Speed (mph) |
|---|---|---|---|
| 4:00 | 15.00 | 6:26 | 9.32 |
| 5:00 | 12.00 | 8:03 | 7.46 |
| 6:00 | 10.00 | 9:39 | 6.21 |
| 7:00 | 8.57 | 11:16 | 5.33 |
Going the other way, from a mile-based figure:
| Pace per mile | Pace per km | Speed (mph) | Speed (km/h) |
|---|---|---|---|
| 8:00 | 4:58 | 7.50 | 12.07 |
| 9:00 | 5:35 | 6.67 | 10.73 |
| 10:00 | 6:13 | 6.00 | 9.66 |
Race distances in both systems
Standard road distances were set in kilometres, yet runners in miles-based countries still think about them in miles. The useful equivalents are:
- 5 km is about 3.11 miles.
- 10 km is about 6.21 miles.
- The half marathon, 21.0975 km, is about 13.11 miles.
- The marathon, 42.195 km, is about 26.22 miles, or 26 miles 385 yards.
The odd marathon figure is a historical leftover. It is a fixed distance that is awkward in kilometres and equally awkward in miles, so a runner should never round it casually when working out a goal pace.
From a finish time to a pace
Divide the total time, in minutes, by the distance. A 25-minute 5 km works out to 25 ÷ 5 = 5:00 per km. A 4-hour marathon is 240 minutes over 42.195 km, which gives 5.688 minutes per km, or about 5:41. In miles, that is 240 ÷ 26.2188 = 9.153, or about 9:09 per mile.
| Goal | Pace per km | Pace per mile |
|---|---|---|
| 5 km in 25:00 | 5:00 | 8:03 |
| 10 km in 50:00 | 5:00 | 8:03 |
| Half marathon in 2:00:00 | 5:41 | 9:09 |
| Marathon in 3:30:00 | 4:59 | 8:01 |
Treadmills and the track
Treadmill consoles usually show speed rather than pace, in km/h or mph depending on the machine. To hit a target pace, convert it to speed first. Many gyms also have machines that display both, but the labels can be small, so check the unit before you start. If your usual outdoor pace is 6:00 per km and the treadmill is set in mph, you need 6.2 mph.
A standard outdoor running track is 400 metres, which makes a mile slightly more than four laps: 1609.344 m is 1600 m plus about 9.3 m. Anyone who runs a “four-lap mile” has actually covered a little under a true mile, so be careful when comparing times across tracks and road courses.
Other sports use other conventions
Swimmers quote time per 100 metres, cyclists mostly use km/h or mph, and rowers use time per 500 metres. The same reciprocal logic applies in every case. To turn a rowing split of 2:00 per 500 m into speed, note that 500 m takes 120 seconds, so the speed is 500 ÷ 120 = 4.17 m/s, which is about 15 km/h.
Common mistakes
- Treating 5:30 as 5.30. Seconds are sixtieths, not hundredths.
- Dividing instead of multiplying. A per-mile pace is larger than a per-km pace.
- Averaging speeds. If you run two equal distances at different speeds, the average is not the arithmetic mean. Average the paces instead, because pace is time per distance.
- Trusting a GPS watch blindly. Distance drift of a percent or two shifts your pace by several seconds per mile.
- Ignoring rounding. A pace given to the second implies more precision than most training data supports.
Frequently asked questions
How do I convert 10 km/h to a pace?
Divide 60 by 10, which gives 6 minutes per kilometre, or 6:00. In miles that becomes 9:39.
How do I convert min/mile to min/km quickly?
Divide by 1.609344. As a mental shortcut, divide by 1.6, then add a hair. 8:00 per mile is about 5:00 per km, with a small correction downward.
Is a 5-minute kilometre a fast pace?
It is a solid pace for many recreational runners. Whether it is fast depends on the distance and the person.
Which is better to train with, pace or speed?
Pace is more intuitive for runners, since it ties directly to finishing times. Speed is easier to set on a treadmill. Learn both, and convert as needed.
Our speed converter handles km/h, mph and metres per second, and our length converter covers the distances.